|
The 71 cm fan generates fresh air around your animals, to prevent heat stress. It can be installed in the holding area, along the feeding tables, over the cubicle side rows in big barns and in barns with low inner height. The installation angle is 19° to 21° along a feeding table or over a cubicle, with six to eight meters between each fan for an optimal ventilation pattern. In a holding area the fan should be installed at an angle of 15° to 30°. The protection grill is tight enough to put the fan below 2.7 m. The number of rows and fans needed in the building depends on its density, construction, utilization and local climatic conditions.
16400 m³/h of air is projected and the speed is automatically adjustable to suit your temperature settings via a control box. For security reasons, the DeLaval DF710 is provided with a protective cage on each side.
Back to top
This easy to use fan withstands aggressive barn conditions like high levels of ammonia, for constant operation with minimal maintenance. It is easy to install in various barn layouts and operates quietly to help keep your cows relaxed. Using DeLaval DF710 means:
• Less heat stress for dairy cows
• Less flies, moisture and ammonia in the building
• Improved air circulation and air distribution
|
Propeller diameter: |
710 mm |
|
Voltage/frequency: |
3x400 V / 50 Hz |
|
Amperage: |
1.3 A |
|
Power consumption: |
0.5 kW |
|
Motor protection class: |
IP 55 |
|
Noise level: |
59 dB (A) |
| Fan speed: |
900 rpm |
|
Max. capacity at 0 Pa: |
16 400 m3/h |
|
Specific efficiency: |
30.5 W/1000 m3/h |
|
Weight: |
28 kg |
Back to top
|
