|
Prioritizing speed and efficiency
Cascade™ parallel parlour is designed to increase the speed of cow traffic and allow smooth, free cow flow. Cows enter quickly because they have a shorter distance to walk compared to other parlour designs. To prevent preloading, overlapping sequencing gates close automatically after each cow exits a stall. A wide cow entry lane lets cows enter their stalls without making a sharp turn, which would otherwise slow them down.
The open bottom neck rail is designed to fit the cow’s shoulder so there’s no pressure on her sensitive areas. In addition, Cascade™ parallel parlour shortens the distance between you and each cow to help minimise operator movement. Control stations are located in the milking pit for easy overall operation.
Cascade™ parallel parlours are made from corrosion-resistant, hot dipped galvanized steel and stainless steel for economical, heavy duty operation. All bends and edges are rounded for maximum safety and welded. The Cascade™ is an all galvanized stall built on 27” stall centres. Neck-rails are constructed in three and four-cow gangs from two-inch black material, then hot dipped galvanized for corrosion protection. The butt pan with elevated gutter is made from 10-gauge stainless steel and is suspended with arches to provide a post-free work area for the operator. Horizontal cross support pipe are used at every arch. Four-inch galvanized columns are used to support the arches and neck-rails. Entrance gates are hinged from the cow platform side to allow all cows easy access to the stalls. Sequencing gates are a four-pipe construction, made from hot dipped galvanized material and floor mounted. An external stainless steel spring is used to close each sequencing gate and keep it closed as cows load the parlour. The parlour package includes All Index, All-EXIT and air power for the entrance gate.
GE/GI (Gang Exit/Gang Index) option lets operators begin preparing cows as the string enters the parlour. The space-saving design uses 27 inch (686mm) wide stalls and indexing rails to correctly position cows for easy udder access. Manure and urine is collected in a butt pan trough and channelled directly out of the parlour. This provides good working conditions, maintains sanitary udders during milking and simplifies clean-up.
- ALL-EXIT™/All Index™
- Adjustable powered index system
- 4" aluminium duplex air cylinder
- Hot-dipped galvanised steel construction
- Suspended 10-guage stainless steel butt pan with elevated gutter
- Floor mounted sequencing gates with external return springs
- Three-position open bottom neck rail design
- Hinged entrance gate
- Gang Exit/Gang Index
- DeLaval milking point MP700
- EnVision™
- CIP cabinetry
- Upgrade to sliding entry gate
- Special stall centres – 28”
- Cascade for Jerseys
- From 2 x 3
- Stall centres: 27" (686mm)
Back to top
click on the link corresponding to your internet access:
right-click on the size you want to save and choose "Save target as... ".
|
