|
Champion™ parallel parlour is specifically designed for use in re-modelling situations. It can be quickly installed and requires minimal on-site welding.
Sequencing gates are neck-rail mounted to eliminate the cow platform’s sequencing gate posts – offering reduced installation time and a fast deck clean-up. Champion™ is built to withstand 24 hour, 7 days a week operation. Sizes availability ranges from a double 4 and larger, for installation in a new or existing facility.
Back to top
Champion™ parallel parlour works well in barns with narrow exit alleys. The neck rails lift vertically to release the cows from the parlour. Because they do not rotate above the exit alley, these neck rails can also be lowered to the load position while exiting cows are in the exit alley. Reloading can begin directly after exiting.
The parlour’s framework is made of galvanized carbon-steel and adjustable air-powered indexing comes standard. The stainless-steel butt-pan with elevated gutter is easy to clean and built to last.
The entire neck rail indexes. This indexing encourages cows to step back over the elevated gutter and back against the butt-pan, positioning each udder close to the operator for easy claw attachment. Proper indexing is the key to safe, comfortable and clean milking.
Back to top
- Vertical lift neck rails of hot dipped galvanized structural steel. (4 and 5 cow sections).
- Neck rail mounted sequencing gates of hot dipped galvanized steel with UHMW bushings.
- Indexing with adjustable index air pressure..
- ALL-EXIT™ release with controls.
- Air cylinders to power ALL-EXIT ™ functions.
- 10-gauge stainless-steel butt-pans with elevated gutter.
- Suspended arch assemblies of 6” x 3” (152x76 mm) galvanized carbon steel.
- Sliding entrance gates of galvanized carbon steel.
- Stainless-steel entrance gate cylinders with controls.
- Milking automation cabinetry.
- EnVision cabinetry or CIP for EnVision with hose passages.
- EnVision curb.
- Stainless-steel skirting.
- Stainless-steel raceway with lift-off cover.
- Deck flush nozzles.
- Remote start controls.
- Light cabinet.
- Installation kit.
- Front-End-Only packages on 27” or 28” centres.
- Double 4, 5, 8 and larger.
- Stall centres: 27” (685 mm) on-centre.
- Overall height required: 8’ 8” (2682 mm).
- Minimum cow platform width: 11’ (2950 mm)
- Optimum cow platform width: 14’ (4267 mm)
- Pit width recommended: 8’ to 10’ (2430 to 3048 mm)
Back to top
click on the link corresponding to your internet access:
right-click on the size you want to save and choose "Save target as... ".
click on the link corresponding to your internet access:
right-click on the size you want to save and choose "Save target as... ".
|
