Designing Your Barn for the New VMS™ V300

By Jeff Prashaw, AIA

The new DeLaval Voluntary Milking System, called Voluntary Milking System VMS™ V300, will be arriving at North American dairy farms very soon. With the enhancements and redesign for the milking system, we must consider some changes to facility and design planning. Here’s what you can expect with the new VMS robot’s anatomical changes and how they will – or won’t – impact the layout of your barn.

What stays the same

The new VMS V300 will essentially require each of the following to stay the same:

  • The size of the pad to rest on (figure 1)
  • Size of the opening in the enclosure, also called the VMS Room (figure 1 and 2)
  • Clearances on the cow side to allow smooth flow (figure 1),
  • Clearances on the operator side to allow ease of use and safety (figure 1).

Figure 1. Plan view showing placement in VMS Room

Figure 2. Elevation view from cow side showing opening in VMS Room

The configuration of the drainage system, including the channel drain running the length of the VMS Room, and the manure discharge drain behind the VMS will also remain the same as before. This includes the drainage channel under the floor when the optional VMS floor grid is present. (see figures 3 and 4 for a detailed look at this type of drainage system design.)

Figure 3. Plan view showing floor drains under VMS

Figure 4. Cross section view showing floor drains under VMS

What changes

Now let’s look closer at some of the differences. Most notably, the feeding module housed in the cabinet at the front of the VMS (cow head side) is narrower, thereby allowing cows to leave the VMS more quickly and smoothly through a much wider exit. (See figure 5 for cabinet comparison.)

Figure 5. Overlay of new and prior VMS

With a narrower cabinet, approximately 27 centimetres has been added to the overall length of the VMS V300. The components housed in the cabinet require little maintenance which reduces accessibility demand, but you can still access them from the cow side and above if needed. The new cabinet design, along with the main access door being relocated to the operator side of the robot, means the robot requires less space in front – reducing the overall size of the VMS Room.

VMS V300 brings many exciting improvements, and I have only defined a few impacting facility planning and design. In the next Navigator newsletter, we will expand the scope and explore how the new VMS is integrated into an actual facility. Of course, there is a lot to learn so please stay tuned!

Contact your DeLaval dealer

For general enquiries